Touch Screen Earloop Antiviral Face Mask Making Machine
Computer program control, high output, good stability and low failure rate.
photoelectric detection of raw materials to avoid errors and reduce waste.
It can produce one to four layers of mask body.
The machine has the function of total count and batch count. The number of batch count can be set arbitrarily.
Replacing the mold can produce masks of different sizes and styles.
the whole machine adopts aluminum alloy structure, beautiful and sturdy.
Main use
This is a full-automatic folding mask machine for making kn95 mask. It is a machine for ultrasonic wire feeding / fabric welding / elastic band welding on the mask body.
| Parameters |
| Type |
ZPFM95 |
| Size |
(9M*1.4M*2M)(L*B*H) |
| Production Capacity |
30~45 Pcs/min |
| Failure rate |
10 min≤8h |
| Power |
380V±10% 50Hz |
| Air supply |
0.6Mpa-0.8Mpa |
| Qualification rate |
98-99% |
| Ultrasonic Frequency |
20KHz |
| Product Size Error |
±1mm |
| Core Components |
PLC, Motor |
| Equipment utilization rate |
≥98% |
| Weight |
1300Kg |
| Working conditions |
| Ambient temperature |
5 ℃ ~ 35 ℃ |
| Altitude |
＜ 2000m |
| Relative humidity |
＜ 85% (no condensation) |
| Installation site |
indoor flat ground |
| Air source |
0.45mpa-0.65mpa |
Introduction
Thank you for purchasing our products. Please read and understand the manual carefully before use, so that you can quickly master the correct use method. Improper use will cause abnormal operation, may cause failure or reduce product quality.
-
During the operation of the machine, it is forbidden to touch the sensing device and moving parts.
-
When it is necessary to check and repair the electrical control circuit, it must be handled by electrical professionals.
-
Without the authorization of the company, it is not allowed to transform the machine or install unauthorized equipment, tools or peripheral equipment to avoid danger.
-
If you are unable to solve the problem in accordance with the requirements of this manual, please consult our company or authorized dealer. It is forbidden to set up the battery without authorization.
-
Do not use the machine outside the specified environment and conditions.
Precautions
-
Do not start the machine until you know the correct operation and safety rules of the machine.
-
It is forbidden to use the machine for untrained or unauthorized personnel.
-
Before using the machine, you must read this manual carefully and understand all contents and instructions.
-
After making sure that the machine has been installed and all necessary debugging has been completed, you can operate the machine.
-
Before starting, make sure that there are no tools or equipment on all surfaces of the machine.
-
If the power supply is interrupted, you should not touch the inside of the machine or electrical appliance.
-
During the operation of the machine, the operator should not leave the working area of the machine.
Structural features
- Automation, simple operation and high efficiency.
- PLC controller / optoelectronics / high reliability / stability.
- Ultrasonic welding is more efficient.
- The operation of the touch panel helps to easily adjust the machine.
- This machine helps to improve the operation efficiency of fault diagnosis.
- The driving system is simple and easy to maintain.
- All these operations are controlled by a program, which helps to adjust and improve the machine
Product Tags:
|
|
Earloop Antiviral Face Mask Making Machine Images
|
